TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK
TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK

TILT TABLE PRO the Original and Ultimate Knife Bevel Grinding Jig with FREE BOOK

Regular price
$295.00
Sale price
$295.00

Original TILT TABLE PRO
The Ultimate Knife Bevel Grinding Jig or Tool Rest

The Tilt Table Pro knife makers jig or tool rest was designed by Jason Northgard and Dan Berg. This table is our premium model it has a larger table, includes all stainless steel hardware and pivots on a precision ground 1/2 inch stainless shoulder screw. Table has a milled belt relief groove so its ready to use without modification. Entire surface is unobstructed with no carriage bolts. This table is rock solid yet can be easily set to any desired bevel angle.  This jig is adaptable so it can fit a variety of 2x72 grinders. As long as the grinder accepts a 1 1/2" square tooling arm the table should fit. The table adjusts up and down, left to right for centering on the platen, and pivots for desired bevel angle. Adjustments can also be made to square the table up to the grinders platen.  1 1/2' tool arm is sold separately. The Tilt Table allows knife makers to grind not only flat bevels but also hollow grinds and recurved bevels. This table comes complete with all stainless steel hardware. Do not be fooled by cheap imitations!

FREE PDF BOOK, and FREE Video  with each order!!!
You get a PDF copy of the book Introduction to Knifemaking by Dan Berg and Jason Northgard. You will also get a video that shows exactly how to use the Tilt Table to produce professional quality bevels. 

Patent Pending No. 16/948,775

 

Want to see how it works?? 

Using the tilt table is probably the closest to free grinding a knife maker can get while still having the angle support of a jig. All the knife maker has to do is to scribe center lines on the edge of the blade and then place the knife blank onto the table. While keeping the blade flat against the table move the blade up until it is in contact with the belt. Then start grinding while carefully keeping an eye on the scribed center line being careful not to grind past the  line. It is that simple. A sharp coarse grit belt is recommended for rough grinding then a finer grit belt can be used to polish the bevels.

Customer Tilt Table Testimonials  

Aside from the investment in a quality 2x72 grinder, this bevel grinding tool rest can be responsible for improving the quality of a knife makers bevels greatly. The Tilt Table can be used on both flat platens and 10" large wheels for hollow grinds.

Tilt Table was featured in the book Introduction to Knifemaking

You get a FREE PDF book with order

Please note the Tilt Table was designed to be attached to a standard 1 1/2 inch TOOLING ARM (sold separately). The table does require some assembly. Although the table is designed to be very adaptable we can not guarantee that it will fit every manufacturers belt grinder. On receipt please bolt it together and make sure the belt grove can be positioned to fit the platen or big wheel of your machine. The Tilt Table can be returned for a complete refund minus shipping cost, as long as it is unmodified and in its original condition.

Tooling arm for Tilt Table now available 

Check out our Knife making tools, huge assortment of topic specific how-to knife making videos, our Complete Online Guide Knife Making  and our New Book Introduction to Knifemaking by Dan Berg and Jason Northgard.